Elongated paddling pool 700 Equipment
NATURA 700 paddling pools are available in four versions:
- SAM
- STANDARD
- LUX
- LUX +
Before the assembly prepare hard, stable, perfectly flat and smooth floor. The floor may be made of concrete, hardened sand or soil.
NATURA 700 in "SAM" version
is designed for those who want to assemble the paddling pool on their own.
NATURA 700 paddling pool in SAM version consists of the following:
- wooden wall construction with assembly components
- skimmer = surface collector = water outlet from the pool to the filter
- inlet nozzle = water return to the pool
- sand filter with top valve
- filter pump
- filter sand
- Filter cabinet [dimensions: width 1m x 1m x height 1.2 m]
- piping: to connect filter and pump to the paddling pool while mounting the filter in the pool.
(for the filter to be assembled in another place the surcharge shall apply)
- - 0.75 mm PVC film in blue colour to fill in the inside of the paddling pool, with film undercoat to be put on the bottom and slats to allow laying the film
- 3-step ladder
NATURA 700 in "STANDARD" version
is designed for those who want to have their paddling pool assembled solidly. The assembly is carried out by specialists. This version differs from "SAM" in that the pool’s bottom is lined with 1.5 mm fibre-reinforced film available in different colours.
NATURA 700 paddling pool in Standard version consists of the following:
- wooden wall construction with assembly components
- skimmer = surface collector = water outlet from the pool to the filter
- inlet nozzle = water return to the pool
- sand filter with top valve
- filter pump
- filter sand
- Filter cabinet [dimensions: width 1m x 1m x height 1.2 m]
- piping: to connect filter and pump to the paddling pool while mounting the filter in the pool.
(for the filter to be assembled in another place the surcharge shall apply)
- 1.5 mm reinforced PVC film to fill in the inside of the paddling pool, available in the following colours: blue AB, light blue CA, green VC, light green VD, with film undercoat to be put on the bottom and slats to allow laying the film.
![]() blue AB |
![]() light blue CA |
![]() green VC |
![]() light green VD |
- 3-step ladder
NATURA 700 in "LUX" variant
is designed for those who like things with quality and comfort of use to have nothing to desire. The assembly is carried out by specialists.
The pool’s bottom is lined with 1.5 mm fibre-reinforced film covered with acrylic layer. The film is available in different colours.
NATURA 700 paddling pool in LUX version consists of the following:
- wooden wall construction with assembly components
- skimmer = surface collector = water outlet from the pool to the filter
- inlet nozzle = water return to the pool
- sand filter with top valve
- filter pump
- filter sand
- Filter cabinet [dimensions: width 1m x 1m x height 1.2 m]
- piping: to connect filter and pump to the paddling pool while mounting the filter in the pool.
(for the filter to be assembled in another place the surcharge shall apply)
- 1.5 mm reinforced PVC film to fill in the inside of the paddling pool, available in the following colours: blue, light blue, white, and green, with film undercoat to be put on the bottom and slats to allow laying the film.
![]() blue |
![]() light blue |
![]() white |
![]() green |
- 3-step ladder
- paddling pool cleaning kit
- chemical agents starter kit including:
pH Minus - 4kg bucket, chlorine tablets - 1kg can, algaecide - 1l bottle
NATURA 700 in "LUX +"
version is designed for those who like striking and dullness-free things. The assembly is carried out by specialists.
The pool’s bottom is lined with 1.5 mm patterned fibre-reinforced film COVERED with ACRYLIC layer. The film is available in different patterns.
NATURA 700 paddling pool in "LUX + " version consists of the following:
- wooden wall construction with assembly components
- skimmer = surface collector = water outlet from the pool to the filter
- inlet nozzle = water return to the pool
- sand filter with top valve
- filter pump
- filter sand
- Filter cabinet [dimensions: width 1m x 1m x height 1.2 m]
- piping: to connect filter and pump to the paddling pool while mounting the filter in the pool.
(for the filter to be assembled in another place the surcharge shall apply)
- 1.5 mm PVC reinforced film in different patterns to fill in the inside of the paddling pool, with film undercoat to be put on the bottom and slats to allow laying the film
![]() Dark mosaic |
![]() Light mosaic |
![]() Carrara |
![]() Persia-BLUE |
![]() Persia-SANDY |
![]() Granito mosaic |
- 3-step ladder
- paddling pool cleaning kit
- chemical agents starter kit including:
pH Minus - 4kg bucket, chlorine tablets - 1kg can, algaecide - 1l bottle